iGrow Pre-Owned

View Original

Zuri Humblet, Fospan Worldwide CEO “Growing Cannabis In Large-Scale Operations Demands Knowledge"

Fospan Worldwide is a Dutch-Spanish solution provider for the horticulture and specialized in the medicinal cannabis industry with many years of cannabis experience. Zuri, Fospan CEO, points out that “One of the most crucial issues in starting a horticulture business, is to look for and rely on specialized companies and products that aim at supporting growers in being successful”.

According to him, most of the time, setting up a growing facility reveals itself to be trickier than initially expected. “Growing cannabis, especially in large scale operations, demands knowledge on what is available on the market. In the recent past, a lot of starting growers jumped into the cannabis industry based on experience gained in small-scale operations from the days where cannabis was mainly cultivated for own usage”, explains Zuri.

For Fospan worldwide it has always been important to be a developing company whose mission is to support growers in being successful. “We help growers with their projects in every possible way. From designing complete facilities, advising or providing growing systems, custom-built aquaponic, aeroponic, natural substrates and hydroponics systems and equipment up to providing Magnus light (Fospan’s brand LED) solutions. But also our Optimus specialty substrates, nutrients and exclusive CBD seeds and award winning Sumo seeds are part of our portfolio”, says Zuri.

A regulation for lighting
Differently from traditional horticulture, cannabis greenhouses need a more careful management of lighting and, as a result, of climate control, especially with regards to the compliance with pharmaceutical standards. Zuri mentions “There are many fields in which we support our customers. A good example is the lightning which is needed in a farm. We were recently informed that the Danish agency responsible for licensing medical cannabis producers issued regulations on lamps that are allowed to be used. Apart from requirements like easily cleanable (for active cooling, no fans and for passive cooling, no cooling fins) and made from non-toxic materials, the output must be of high quality to ensure that yields and cannabinoid profiles are consistent. Further it is mentioned that the luminaires and parts must be of high quality so that their light output and spectrum does not decay quickly, dramatically affecting the yields. This also concerns the wavelength distribution of the spectrum which must remain without significant changes throughout the luminaires’ lifespan to ensure consistent yields and cannabinoid expressions”.

On the left: water-cooled ML-365 in a medical cannabis facility. On the right: water-cooled ML-700 in a medical cannabis facility

Zuri continues: “Such a regulation disqualifies HPS lamps from being used in GMP/GACP compliant cannabis production. Their light rapidly loses intensity, creating differences among growth cycles, while constancy is a key requirement. The regulations also mention that there is a product safety risk due to braking of the bulb of the HPS fixture as the entire facility would be compromised as the sodium and mercury inside the bulb would get dispersed all over the canopy”

With an eye for future developments, Zuri states: “I am rather convinced that the rules and regulations developed by the Danish authorities will be guiding for a lot of other countries, in and outside Europe, that are in the process of licensing medical cannabis production and whose government agencies will for sure demand GMP/GACP standards.”

As Fospan is the developer and exclusive provider of Magnus LED lights, Zuri understands some Danish regulations, even on the use of LED technology, which in fact support his advices. Most LED luminaires have deep fins which are used for heat dissipation. While good at removing excess heat, those lamps are very difficult to clean, which is seen as an important issue by the Danish regulator, according to him. “Even with a special set of tools and a high effort to get inside the ridges and remove the dust particles and pathogens from within, it would be hard to be absolutely sure and prove that these have been properly sterilized.”

Multiple solutions available

Zuri explains other consequences of the Danish ruling: “LED luminaires with active cooling such as fans cannot be completely closed as they need to circulate air. This means having a device that is even more difficult to clean than a passively cooled LED i.e. one with deep fins. Furthermore, the quality of spectra inside LED luminaires - while better than HPS - varies significantly from manufacturer to manufacturer. In some brands of LED lights, parts of the spectrum will start to diminish already after 10.000 hours of operation, starting with the blue peak and other shorter wavelengths resulting in taller plants with less cannabinoid accumulation (similar to HPS grown plants). This is dependent on the quality of the LED chips the manufacturer uses. The best quality chips will sustain the same spectrum quality with minimal variation over its entire lifespan”

ML-270 & ML-365 COB LED Lights with farred control | available in air or water-cooled fixtures

Zuri is more than happy that Magnus Lights anticipated on such regulations. “These are examples where our experience and partnerships played a major role” he says. Fospan worldwide developed water-cooled Magnus LED (100.000 light hours = 22 years of flowering) specifically for the medicinal cannabis industry and GMP standards. “For instance, some positive points are that the fixtures are totally closed, made of full aluminum parts and available in different wattage, voltage or type fixtures like linear or COB top-lights. The lights are developed in close collaboration with Parus who is one of the leading horticulture LED manufacturers in the world. To underline the quality and durability of the LED’s manufactured by Parus: in a project for the largest Russian lettuce producer which they installed in 2008 has not occurred a single LED fail or output decay until today”, he explains.

All in one
One of the pressing problems within this industry is the lack of a common knowledge that everyone can resort to. “There are so many products and there is so much information published – which is also an indication of how this industry is blooming. At the same time, it is hard for growers to understand what the best way to do things is, and who and what to rely on”. Zuri reacts to those development saying: “That is why we prefer to be completely honest to our clients, and share our experiences and everything we know about this industry with them – as we have been in this business for over 17 years and love what we are doing”.

Zuri explains that Fospan support its clients with tailor-made solutions and in every step of the process, starting from designing and building the facility to growing the plants. “One of trickiest aspects in cannabis growing facilities is lighting, and especially keeping it equal throughout the facility.” Zuri explains that it is crucial to design a lighting system that takes the complete lay-out of the facility into consideration and calculates the amount of micromoles required. “We distribute Magnus Light solutions and design a light plan specifically for each growing facility.”

Multi-layer solutions

According to him, Magnus Light solutions are a solution for both for the vegetative as well as the flowering state. Additionally, Magnus Light solutions support growers in keeping the growing facility as cool and efficient as possible: “We indeed offer lights with a water-cooling system, thus reducing the heat generated up to 20%” not even to mention that this effects also the lifespan positively.

Bringing the industry together
“Through Fospan Worldwide, we try to help growers in every possible aspect of their cannabis projects. For instance, we can supply them with genetics. Our strain portfolio is very diverse, from high THC/low CBD, to high CBD/low THC. With regards to our specialty substrates Optimus portfolio, we can, if requested, provide a made-to-measure mixture for a client who has already a personal mixture in use”.

Zuri underlines: “Fospan’s job is not finished after a project is completed. We take care of our clients, and we really like to follow up with them, exchange ideas and provide them with new developments. Success is the best advertisement. We have been active in this industry for a substantial amount of time, and therefore we have quite a number of connections. This allows us to support growers also in other types of activities and plans, as we can point them to the right direction, company and/or person. There is still a lot to learn in this industry and market, and we think it is important to support each other.”

For more information:
Fospan Worldwide
fospan.com  

Magnus Light
magnuslight.com 

Publication date: 4/12/2019 
Author: Andrea Di Pastena 
© MMJDaily.com